L1® Model II double bass package

Recommended for DJs and lower-range instruments and voices
Spatial Dispersion™ and Articulated Array® speaker technologies
Single-input power stand with retractable legs
Two B1 bass modules included

Bose® L1 Model II systems are our best performing, most portable amplification systems for musicians, singers, DJs and public speakers. These loudspeakers deliver wide horizontal sound coverage and our smoothest tonal balance—across the stage and throughout the room. Lightweight and modular, this sleek system fits easily into a car trunk and takes just a few minutes to set up.

Like the original, award-winning Bose L1 system, the Model II sound system is an all-in-one innovation that replaces conventional monitors, mixers and PA speakers. And this professional sound system is packed with proprietary Bose technologies designed to improve your amplified sound.

Sound advantages—only from Bose

The system's breakthrough loudspeaker produces wide, uniform sound coverage of nearly 180 degrees—onstage and throughout an audience of up to several hundred—with little dropoff in volume and tone.

The Model II system also features Articulated Array speaker technology for better tonal balance. The loudspeaker's 24 vertically mounted drivers are precisely angled to create clearer highs and more consistent tone in the room. Even people off to the sides of these stage speakers enjoy well-balanced, detailed sound.

Deep bass from small enclosures

Bose L1 Model II systems come with one B1 bass module to ensure more accurate amplification of lower notes for most voices and instruments—including guitars, keyboards and various horns. The double bass package is recommended for use as a bass guitar amplifier, and for kick drums and DJs.

B1 bass modules are considerably lighter and smaller than conventional bass bins required for the same performance. Power up to two bass modules on a single power stand. Add two more bass modules to the system with an optional PackLite® extended bass package.

Light and easy

The L1 Model II power stand weighs only 24 pounds, and its four retractable legs make it very easy to transport and set up. The power stand also has a simplified control section; the single line-level input can be used with instruments, mics, mixers, laptops, MP3 players or DVD systems.

All of the system's components are also built to handle the road. The loudspeaker has a rugged, reinforced grille, and each package includes padded carrying bags for major components.

For multichannel power: ToneMatch® audio engine

Add the optional T1 ToneMatch audio engine to quickly expand the system and fine-tune your sound with powerful, proprietary tone-shaping tools.

The compact, four-channel engine provides fingertip control of our largest library of ToneMatch presets. Just touch a button to make hundreds of precise refinements to the sound of instruments and microphones.

The engine also features a complete suite of studio-class reverbs, additional effects and dynamics processing. It connects to the L1 Model II system via a single digital cable for quick, streamlined setup.

Features

Cylindrical Radiator and Articulated Array speaker technologies, available only from Bose

Spatial Dispersion™ and Articulated Array speaker technologies in the loudspeaker produce wide, uniform sound coverage. The 24 small drivers are arranged using Articulated Array speaker technology in a slim, vertical enclosure—creating nearly 180 degrees of horizontal coverage and consistent tonal balance. The loudspeaker's two-piece, interlocking design makes for quick and easy setup, breakdown and transport.

Built-in power amps to drive the loudspeaker and up to two B1 bass modules

Integrated power amplifiers in the power stand provide clean, precise amplification for L1 Model II system with up to two B1 bass modules.

Dimensions | FAQs | Manuals | Owner's information

Dimensions

L1 Model II Cylindrical Radiator® loudspeaker top

43.5"H x 3.5"W x 4"D ( 110.5 cm x 9 cm x 10.5 cm )

16.3 lbs (7.4 kg)

L1 Model II Cylindrical Radiator® loudspeaker bottom

43.5"H x 3.5"W x 4"D ( 110.5 cm x 9 cm x 10.5 cm )

17.4 lbs (7.9 kg)

L1 Model II power stand

5"H x 10"W x 27"D ( 12.8 cm x 26.2 cm x 69.2 cm )

13.7 lbs (10.7 kg)

B1 bass module

15"H x 10.25"W x 17.75"D ( 38 cm x 26 cm x 45 cm )

25.1 lbs (11.4 kg)

Top

FAQs

Is this L1 system really a "plug and play" solution? How long does it take to set up?

All L1 systems feature easy-to-assemble components that take just a few minutes to set up. Each component is relatively lightweight and can be carried by one person with no need for special equipment.
Does every musician need his or her own L1 system?

No. In some cases—for example, amplifying a larger group on a small stage—testing showed two or more musicians standing or sitting next to each other could share one L1 unit without significantly reducing the core benefits of the system.
In what types of venues can I use this L1 system?

L1 systems work well in small-to-medium size venues where the majority of live music and spoken-word performances take place—including clubs, coffeehouses, auditoriums, gymnasiums and houses of worship.
Can the system be used as a traditional PA?

Yes. You can use this L1 system to replace conventional PA mixers and speakers.
For what types of instruments and voices is this system recommended?

The L1 Model II double bass package is recommended for DJs and lower-range instruments, including upright bass, electric bass and kick drum.
Can I add a T1 ToneMatch® audio engine to this system in the future?

Yes. You can add the ToneMatch audio engine to this system at any time. No additional power supply is required.
Can I add more bass modules?

Yes. You can expand the system (for a total of up to four bass modules) with our optional PackLite® extended bass package.
Where can I find more technical information and discussions about L1 systems?

Visit the L1 Systems Users Forum for extensive technical discussions, interactive tools, videos and other helpful resources for L1 systems.