ENJOY FREE EXPEDITED SHIPPING WHEN YOU ORDER TODAY
 

Connecting a device to the auxiliary input

You can connect a variety of devices to your SoundLink Color speaker, even if the device doesn't have Bluetooth. These devices can plug into the 3.5 mm line input jack on the side of the speaker.

Note: Depending on the connection of the device you want to connect, a 3.5 mm stereo audio cable or a red and white RCA-to-3.5 mm stereo cable is needed.

Connect your stereo input cable to the device

This is commonly the headphone jack on most portable devices. On other devices (i.e. TVs or CD changes), look for a pair of red and white jacks labeled "Line Out" or "Audio Out."

Connect the other end of the cable into the line input jack on the side of your SoundLink speaker

On the speaker, press the Line Input button

On the connected device, set the volume to 90% and use the SoundLink speaker volume control to adjust the volume level

If a device is connected but not playing audio, the speaker will turn itself off after 30 minutes.

Note: The USB jack on the speaker is for charging and update. Audio can be played via the USB jack

Was this helpful?

Submit

Thank you for submitting your comments.