FREE 2-DAY SHIPPING FOR ORDERS OF $50 OR MORE, AND FREE RETURN SHIPPING
 

Connecting your headphones to a Bluetooth® device

Applies to:

The BoseBuild Listen app is only available for iPhone and iPad. However, once the headphones are fully assembled, you can pair any Bluetooth-compatible phone or tablet to the headphones.

To connect your headphones, follow these steps:

Check to see that the Bluetooth light on your headphones is blinking Blue. If it is not, slide the Power/Bluetooth button forward to the Bluetooth symbol and hold for 2 seconds until you hear "Ready to connect" and the Bluetooth light blinks Blue. This means they are ready to pair with your mobile device

On your mobile device, make sure Bluetooth is on. (The Bluetooth menu is usually found in the Settings menu)

Select your BOSEbuild Headphones from your mobile devices' Bluetooth list

Once connected, the Bluetooth LED indicator glows solid White, and the voice prompt says, “Connected to <device name>"

Note: When powered on, the headphones try to reconnect with the two most recently-connected devices. The devices must be powered on and within range (30 ft or 9 m).

Did this information help?

Nice, thanks for the feedback. Please feel free to share additional comments below.
We’re sorry this page didn’t meet your expectations. Please tell us about your experience and/or what we could do better.
Submit
Thanks, we appreciate the additional feedback you’ve provided