FREE 2-DAY SHIPPING FOR ORDERS OF $50 OR MORE, AND FREE RETURN SHIPPING
 

My headphones will not pair with my Bluetooth® device

Your headphones will not connect to your device while charging. If your headphones are not charging and still not connecting to your device, here are a few things to try:

On your headphones:

Power cycle the headphones: Power the headphones off by holding the Power button for 2 seconds until you hear the power down tones. Then, power them on by pressing and releasing the Power button

Right earbud highlighting the Power button

Reset your headphones:

  1. Power the headphones off and wait for 30 seconds
  2. Plug the headphones into a USB power supply via a USB cord and wait 5 seconds. (Power supply needs to be plugged into a working outlet)
  3. Unplug the USB cord from the headphones and wait 1 minute
  4. Turn the headphones on and test if they work properly

Clear the headphones pairing list:

  1. Power off the headphones
  2. Press and hold the Power button for 10 seconds, until you hear “Bluetooth device list cleared.”
  3. Remove your headphones from your device's Bluetooth list. This is typically done by selecting your headphones in the device's Settings > Bluetooth list and selecting "Forget," "Unpair," or "Remove"
  4. Your headphones are now "Ready to pair" to your device. Go to your device's Bluetooth settings and select your headphones as a new device

On your mobile device:

Turn Bluetooth off then on again

Toggle Airplane mode on then off

Reboot your device

"Forget," "Unpair," or "Remove" your headphones from your device's Bluetooth list, then connect again

Connecting to a computer

If connecting to a Windows computer, you may see 2 different icons in the device pairing list (a device icon and a headphone icon). Make sure you select the headphone icon

Did this information help?

Nice, thanks for the feedback. Please feel free to share additional comments below.
We’re sorry this page didn’t meet your expectations. Please tell us about your experience and/or what we could do better.
Submit
Thanks, we appreciate the additional feedback you’ve provided