You can store up to eight paired mobile devices in the speaker pairing list. You can also connect your speaker to your device using the Bose Connect app.
To pair a Bluetooth device:
Power on your speaker, then press and hold the Bluetooth button until the Bluetooth LED starts flashing Blue and you hear a voice prompt say "Ready to connect" (if enabled)
Pressing the Bluetooth button again will switch to connecting mode (flashing White) then to discoverable mode (flashing Blue)
The speaker remains discoverable for 5 minutes, or until a Bluetooth connection is made
On the device you want to connect, turn on Bluetooth. This is typically found in the device's settings menu
Select your Bose Revolve SoundLink speaker from the device list
Once connected, you hear “Connected to <mobile device name>,” and the Bluetooth indicator glows solid White
To pair an additional mobile device:
Press and hold the Bluetooth® button until the Bluetooth indicator blinks Blue, and you hear, “Ready to connect another device”
Connect your device to the speaker using the steps above
You can store up to eight paired mobile devices in the speaker pairing list, and your speaker can be actively connected to two mobile devices at a time.
However, you can only play audio from one device at a time.
To identify and switch between connected devices:
Press the Bluetooth® button to hear which devices are currently connected
Pause audio on your first device to switch to the second device
Play audio on your second device
To disconnect a device:
Turn off the Bluetooth feature on your device
If your device supports pairing via NFC, tap and hold the NFC touchpoint on your device to the top center of your speaker. The target area is the Bose logo
To reconnect a device:
When powered on, your speaker tries to reconnect with the two most recently connected devices. The devices must be within range and powered on. If your device supports pairing via NFC, tap and hold the NFC touchpoint on your device to the top of your speaker. The target area is the Bose logo.