Restoring factory defaults

A factory reset clears all source, volume and network settings from the system and returns it to original factory settings.

Resetting the Wave music system:

  1. On the remote, press and hold Alarm Setup (Menu) until "-SETUP MENU-" is displayed
  2. Press Tune/MP3 > ten times until "RESET ALL- NO" is displayed
  3. Press Time – or Time + to change "RESET ALL- NO" to "RESET ALL- YES." "PRESET 3 TO CONFIRM" will appear on the display
  4. Press Preset 3 to confirm. When the reset is complete, "RESET COMPLETE" is displayed. The setup menu will automatically exit after 10 seconds

Resetting the SoundTouch pedestal:

  1. Ensure that the SoundTouch pedestal cable is inserted into the Bose link connector
  2. Disconnect the system from powerPress and hold the Control button on the back of the SoundTouch pedestal
  3. While pressing and holding the Control button, reconnect powerHold the Control button for five seconds and then release it. The system restarts
  4. Launch the SoundTouch app on your computer and add the system to your network

Did this information help?

Nice, thanks for the feedback. Please feel free to share additional comments below.
We’re sorry this page didn’t meet your expectations. Please tell us about your experience and/or what we could do better.
Thanks, we appreciate the additional feedback you’ve provided