FREE 2-DAY SHIPPING FOR ORDERS OF $50 OR MORE, AND FREE RETURN SHIPPING
 

Setting the room code

Applies to:

Your Wave® radio comes from the factory ready to operate as a second-room device (room code B) when connected to a Bose® link-enabled Lifestyle® system. If you want to use your Wave® radio with your Lifestyle® system beyond a second room, you will need to change the room code to match that of the remote control you are using for that room.

Refer to your Lifestyle® system owner's guide for more information on room codes.

on the remote, press and hold alarm time/menu until "setup menu" is displayed

Alarm Time/Menu

press tune > six times until "room- b" is displayed. the dashes following the room letter indicate how the microswitches should be set on the lifestyle® system remote control

Tune >

press time - or time + to select a room code other than room b

Time -

Time +

press alarm time/menu to exit the setup menu or wait 10 seconds for the setup menu to end automatically

Did this information help?

Nice, thanks for the feedback. Please feel free to share additional comments below.
We’re sorry this page didn’t meet your expectations. Please tell us about your experience and/or what we could do better.
Submit
Thanks, we appreciate the additional feedback you’ve provided