ENJOY FREE EXPEDITED SHIPPING WHEN YOU ORDER TODAY
 

Setting up system

To set up the system, follow these steps:

Insert one end of the audio input cable into the Acoustimass® module jack on the control console

Insert the other end of the audio input cable into the Media Center jack on the Acoustimass® module

Insert the RCA plug of each speaker cable into the five speakers jacks on the Acoustimass module

Insert an HDMI® cable into an HDMI jack on the rear of the television

Insert the other end of the HDMI cable into the HDMI OUT Video to TV jack on the control console

Connect the power cord to the AC Power jack on the Acoustimass module and to a power outlet

Connect the cable attached to the power supply to the Power jack on the control console

Connect one end of the 2-prong plug to the power supply and the other end to a power outlet

Note: The use of an "HDMI-to-DVI" cable is acceptable for monitors that do not have an HDMI input. Use of "HDMI-to-DVI" adapters or switches is not supported.

For speaker placement suggestions, see Speaker placement.

Was this helpful?

Submit

Thank you for submitting your comments.