Bose® Solo 15 TV sound system

Sold from 2014 - 2015

Help us provide the best support by confirming your product below
Select your product
Product image
Enter a search term in the field above.
Nothing found. Please enter a valid search (i.e., connection help, no audio from headphones, etc.).

Programming your remote

The universal remote control for your system can control other devices, like a cable box or Blu-ray player that is connected to your product. Learn how to program the universal remote to control a connected device.

To program your remote:

Here are some things to know:

  • Some brands have many devices, so you might need to try several codes to find one that works
  • If the source button on your remote turns off, it is not in programming mode. Start the programming process again
  • While your univeral remote can control many devices, it might not be able to control or fully control all devices

To program the universal remote:

  1. In the remote control code booklet included with your system, find the code for the brand you want to control
    Tip: If you need the code booklet, search for and select your product at, then click the Downloads tab
  2. On your remote, press and hold the source button of the device you want to control (i.e. TV or CBL-SAT) until all six source buttons glow
  3. Release the button so only the button you held glows
  4. Enter the code for the device brand, then press the Volume + button
    Tip: If all six source buttons blink three times, an invalid code was entered
  5. Check if the remote controls the device:
    • For TVs, try the Channel buttons, then press Menu and try browsing with the Arrow buttons
    • For cable/satellite boxes, press the Guide button and try browsing with the Arrow buttons
    • For DVD/Bu-ray players, press the Menu or Guide button and try browsing with the Arrow buttons
    • For game systems, try browsing with the Arrow buttons
  6. If the code works, press Exit to save your settings
  7. If the code does not work, press Volume + to select the next code for the brand, then repeat step 5
    Tip: If the six source buttons on your remote blink three times, there are no additional codes for the brand.

Once programmed, press the device button on the remote to control that device.

After programming the remote to control an external device, press the device button on the remote to tell it which device you want to control. For example, to control your cable or satellite box, press the CBL-SAT button on the remote, then press the buttons you want to control on your cable or satellite box.
    Was this article helpful?
    Thank you for your feedback!