Back to article
3348
Note: Adapters produced after DOM 4286 have a clear plastic lens in front of the indicator allowing the light from the LED to be seen more easily. Adapters produced before this DOM may require looking directly in to the hole to to see the LED.
Understanding LED indicator status lights and information
Find out what the LED indicator light on your product tells you about the status of your product.
Control Console LED Status Indicator
| LED State | Description | |
|---|---|---|
| Off |  |
System is off (Standby) |
| Solid Red |  |
System is in network standby |
| Blinking Green |  |
System is starting |
| Solid Green |  |
System is ready to use |
| Solid Amber |  |
System is powering down, or system is off and charging an iPod |
SoundTouch Wireless Adapter LED Status Indicator
| LED State | Description | |
|---|---|---|
| Off |  |
The adapter is unpowered, connected via Ethernet or the network is disabled |
| White (blinking fast) |  |
The adapter is attempting to connect to a Wi-Fi network |
| White (slow flash) |  |
The adapter is downloading a firmware update |
| White |  |
The adapter is connected to a Wi-Fi network |
| White (solid 3 sec, double-flash, repeat) |  |
The adapter is installing a firmware update |
| Amber (blinking) |  |
The adapter failed to connect to Wi-Fi / network error |
| Amber (blinking fast) |  |
The adapter has a firmware error |
| Amber (solid) |  |
The adapter is in setup mode broadcasting its "Bose SoundTouch Wi-Fi Network" |
Speaker Array LED Status Indicator
| LED State | Description | |
|---|---|---|
| Off | |
Speaker array and Acoustimass module are connected |
| Slow Blinking Orange |  |
Speaker array is available to make a wireless connection |
| Fast Blinking Orange |  |
Speaker array is disconnected and trying to connect |
| Solid Green | |
ADAPTiQ system is running |
| Blinking Green | |
ADAPTiQ system is calculating data |
| Solid Red | |
System error or Acoustimass module connection issue |
Acoustimass Module LED Status Indicator
| LED State | Description | |
|---|---|---|
| Solid Orange | |
Speaker array and Acoustimass module are connected |
| Blinking Orange (every 3 seconds) |
 |
Acoustimass module is disconnected from speaker array (or speaker array is off: Acoustimass module standby) |
| Slow Blinking Orange | |
Acoustimass module is available to make wireless connection |
| Solid Red | |
System error |
Back
Loading
Was this article helpful?
Thank you for your feedback!