FREE EXPEDITED SHIPPING WHEN YOU ORDER TODAY
 

Caring for your Bose® product

Applies to:

  • productshortname_dummy

Be sure to adhere to the following instructions for cleaning the outside surfaces of the product, especially the A/V monitor screen.

Cleaning the A/V monitor screen

Before you start cleaning the screen, make sure you have the recommended cleaning cloths and solutions.

Recommended cleaning cloths

A double-sided microfiber cloth is recommended for cleaning the A/V monitor screen. These are extremely soft, non-abrasive and non-electrostatic. Be sure to remove any tags from the cloth before using it on the screen. The tags are usually a different material that may scratch the surface.

Recommended cleaning solutions

Use a cleaning solution specifically made for cleaning LED or LCD screens. You can find these cleaning solutions where electronic products are sold.

CAUTION:

  • Use only cleaning solutions made specifically for cleaning monitors and monitor screens. Cleaning products not made for monitors can scratch the screen or strip off the finish
  • Do not use cleaning solutions that contain acetone, ethyl alcohol, ethyl acid, ammonia or methyl chloride

WARNING: To avoid the risk of electric shock, make sure your hands are dry before unplugging your system from, or plugging your system into, an electrical outlet.

For a light cleaning

  • Turn the system off and disconnect the A/V monitor power cord from the wall receptacle
  • Using as little pressure as possible, gently wipe the surface of the A/V monitor screen using a clean and dry microfiber cloth

Cleaning tough marks and smudges

  • Turn the system off and disconnect the A/V monitor power cord from the wall receptacle
  • Spray a small amount of a non-abrasive cleaner on a microfiber cloth (see “Recommended cleaning solutions” above)
  • Using as little pressure as possible, gently wipe the surface of the A/V monitor screen
  • Wait until the A/V monitor is completely dry before plugging it in and starting the system up again

CAUTION:

  • When you clean your A/V monitor, do not press down on the screen. Pressing down on the screen can scratch or damage the display
  • Do not use paper towels or abrasive pads to clean the A/V monitor. Using these materials can scratch your screen
  • Do not spray any liquids directly onto the A/V monitor screen or cabinet. Spraying liquids directly onto the screen or cabinet can cause damage. Always apply the cleaning solution to a microfiber cleaning cloth first

Cleaning the product enclosures

  • Wipe the product enclosures using only a soft, dry cloth
  • Do not use any solvents, chemicals or sprays
  • Do not allow liquids to spill or objects to drop into any openings
  • Do not blow compressed air into or vacuum ventilation openings

Was this helpful?

Submit

Thank you for submitting your comments.