Connecting the system components

On the media center back panel, insert the audio input cable plug into the Main speaker jack

On the Acoustimass® module connection panel, insert the other end of the audio input cable plug into the Media Center jack

Insert the power cord into the Acoustimass module and into a power outlet

From the power supply, insert the plug of the attached cable into the DC Power jack on the media center back panel

Insert the 2-prong plug into the power supply and the other end into a power outlet

connect all five speakers. on the acoustimass module connection panel, insert the color-coded rca plugs for all five speaker cables into the jacks labeled speakers. notice the letters on the cable end that identify the position of the speakers in the room, and route the cable accordingly. to find out more about speaker placement, see speaker placement and adaptiq® audio calibration system guidelines

The plug-in cable for your speakers fits only one way into the jack, which ensures proper polarity (+ to + and - to -) connections. To connect the plug-in speaker cable, orient the plug of each speaker cable with its small knob up and insert the plug fully into the jack on the rear of its respective speaker

Was this helpful?


Thank you for submitting your comments.