FREE EXPEDITED SHIPPING WHEN YOU ORDER TODAY
 

Unify® system overview

Applies to:

  • productshortname_dummy

The Unify intelligent integration system guides you through the initial process of setting up and configuring your system. It helps you to choose the right cables and inputs, and to program your system’s remote to operate your connected devices.

After completing the initial setup, you can use the Unify system at any time to change your system setup and configuration.

Using the Unify menu

To access the Unify system:

press the setup button on the front of the a/v control console to display the unify menu.

Use the navigation arrows on the remote to highlight the function you want.

press ok on the remote to activate the function.

when you are done, select “exit unify” at the bottom of the menu.

note: to exit the unify menu at any time or cancel the function you started to use, press source on the remote, or setup on the a/v control console.
 

Unify system functions

resume initial setup
this function is available only if the initial setup process is not completed. selecting this function returns you to initial setup process at the last completed event.

restart initial setup
this function is available only if the initial setup process is not completed. selecting this starts the initial setup process from the beginning.

language
this function allows you to change the language of the onscreen information.

adaptiq\xae
selecting adaptiq runs the audio calibration process that adjusts the system audio output for the best performance in your room.

play bose\xae demo
plays the bose audio/video demonstration.

source setup
a setup function will appear in the menu for each connected device using the name assigned to it during the initial setup process. for example, you might see "cable setup," "satellite setup," or "dvd setup."

this function is available only after the initial setup is completed.

this function allows you to:

  • change the name of a connected device
  • set up the remote control
  • remove this device
  • add or change video or audio connections

add a new device
this function guides you through the process of connecting a new device to the system. it will help you to choose the right cable and input, and to program the remote to operate the device.

this function is available only after the initial setup is completed.

update
this function guides you through the process of updating the software in your system. by using a computer with an internet connection, system software updates from bose can be downloaded to the usb drive that is included with your system. be sure to carefully follow the instructions displayed on your videowave® system a/v monitor.

teach mode
this function shows you how to program a third-party learning remote to control your videowave system. when in this mode, the videowave system transmits an infrared (ir) code for each button pressed on the videowave system's remote control. the third-party remote learns how to control your system by recording these codes. follow the instructions displayed on your videowave system a/v monitor. to exit this mode, press setup on the a/v control console.

this function is available only after the initial setup is completed.

exit unify
closes the unify menu and returns you to the last source selected.

Was this helpful?

Submit

Thank you for submitting your comments.