FREE 2-DAY SHIPPING FOR ORDERS OF $50 OR MORE, AND FREE RETURN SHIPPING

Lifestyle® 35 DVD home entertainment system

Sold from 2001 - 2004

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (i.e., connection help, no audio from headphones, etc.).

Black and white video from a connected video device

If a video device (i.e. cable box, Blu-ray player, game system, etc.) that is connected to your system does not appear as expected on your TV, try the following:

Check if the issue is only with devices connected to your system.

Try playing a DVD on the disc player built-in to your system. If the same issue occurs, see Black and white video when playing DVD on internal player.

Be sure the external video device is properly connected to the Bose system.

A connection may have come loose or may be incorrect. Check all connections. Be sure the external device output jacks are connected to available input jacks on the Bose system using the appropriate cable(s)

Note: Be sure the same type of video cable (composite cable, S-Video cable or the component adapter) is connected to both the Video IN and Video OUT jacks of the media center. The media center does not convert one type of video signal to another. For example, connect composite cables to both the Video IN and OUT jacks

If using the component video adapter, be sure the correct adapter is connected.

Series 1 and series 2 Lifestyle systems use different component video adapters. Be sure to use a series 1 adapter with a series 1 system and a series 2 adapter with series 2 system. Check which adapter you have by looking at the male composite connector on the adatper (the connector that plugs into the yellow Video OUT jack on system console):
  • If this connector is black, follow it to the opposite female end: If the female end is red, it's a series 1 adapter; if the female end green, it's a series 2 adapter
  • If this connector is yellow, it's a series II adapter

When using a series II component video adapter with a series I system, be sure to connect the adapter as follows:

  1. Connect the red female end of the component video adapter to the blue male end of thecomponent video cable
  2. Connect the blue female end of the component video adapter to the green male end of the component video cable
  3. Connect the green female end of the component video adapter to the red male end of the component video cable

Replace the video cable used to connect your product.

Try replacing the video cable that connects your product. If no issue occurs with the new cable, there was a problem with the original video cable.

Connect the video output of the source directly to the TV.

If the issue still exists, the problem is with the connected source, the TV or the cable being used.

Reset your media center

A reset is used to correct occasional product issues. It is not something that a product should require repeatedly. For more information, see Resetting your product.

Your media center may need service.

If the steps provided do not resolve your issue, your product may need service. Follow the link below for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.

Click here to start service
Loading
    Was this article helpful?
    Submit
    Thank you for your feedback!