FREE 2-DAY SHIPPING FOR ORDERS OF $50 OR MORE, AND FREE RETURN SHIPPING

SoundLink® Bluetooth® Mobile speaker II

Sold from 2012 - 2015

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (i.e., connection help, no audio from headphones, etc.).

Replacing the battery in your product

The battery in your product can be removed so you can insert a new battery if your battery weakens or dies. Find out how to access and replace the battery.

Attaching or removing the battery

To remove the battery:
  1. Using the 2.5 mm hex wrench supplied with the replacement battery, remove the two screws at the bottom of the speaker

    Removing two screws at bottom of speaker
     
  2. Push up on the back of the cover until it slides up slightly

    Push up on back of cover
     
  3. Pull the cover up and away from the speaker back

    Pull cover up and away
     
  4. Using the 2.5 mm hex wrench, remove the two screws securing the battery (located near the bottom of the speaker)

    Removing the two screws securing the battery
     
  5. Pull the battery straight out of the speaker

    Removing the battery
     
To attach the battery:
  1. Replace the screws in the battery and tighten with the 2.5 mm hex wrench

    Inserting battery and tightening screws
     
  2. Align the holes inside the cover with the anchor posts on the back of the speaker, and press the cover into place

    Aligning the holes inside the cover with the anchor posts
     
  3. Slide the cover down on the anchor screws until it stops

    Sliding on cover until it stops
     
  4. Replace and tighten the screws in the bottom of the cover

    Tightening the screws on cover bottom
     
Loading
    Was this article helpful?
    Submit
    Thank you for your feedback!