FREE 2-DAY SHIPPING FOR ORDERS OF $50 OR MORE, AND FREE RETURN SHIPPING

Lifestyle® 18 Series III DVD home entertainment system

Sold from 2006 - 2010

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (i.e., connection help, no audio from headphones, etc.).

Low audio from product

If the volume level heard from your product is faint or quieter than normal, try the following:

Be sure the system is set up properly and all connections are secure.

A connection may have come loose or may be connected incorrectly. For more info, see Setting up your product.

In your system menu, turn up the input level for the connected device.

The volume output of different brands and devices can vary. To compensate, you turn up or down the audio input level in your system menu for devices connected to your system. The can help even out volume levels when switching from one device to another. For more info, see Changing input levels to even out volume among connected devices.

Check the bass and treble controls for your product.

Be sure the bass and treble adjustments are not set too high or too low for your preferences. For more info, see Adjusting the tone controls on your product.

Reset your system

A reset is used to correct occasional product issues. It is not something that a product should require repeatedly. For more info, see Resetting your product.

Run the ADAPTiQ audio calibration to optimize the sound of your system.

Since different environments affect how sound is heard, use ADAPTiQ can calibrate you system. It listens to how your speakers sound in your room, then adjusts the sound as needed to optimize sound quality. For more info, see ADAPTiQ system setup and deactivation.

Check the condition of the speaker wires and be sure they are secure at both ends.

Check the speaker wires for any kinks, scratches, cuts or damage. Replace any damaged wires and check that they are securely connected at both ends.

If your media center power supply has a voltage switch, be sure the correct voltage is selected.

On the bottom of a dual voltage power supply, there is a 230V/115V switch. If your power supply has this switch, disconnect it from the power outlet, set the switch to the voltage used in your region, then reconnect power.

If your bass module was replaced with another unit, determine if it has a dual-voltage switch.

A dual-voltage bass module will have a red switch near the power jack indicating whether it is set to operate on 115 or 230 Volts. If your bass module has a dual-voltage switch, be sure the correct voltage setting is shown. If you need to change the switch setting, unplug the bass module power cord, change the setting, then reconnect the power cord.

If the issue occurs with a certain source, select it below for more help.

TV

Cable/satellite box

Another device (i.e. Blu-ray player, game system, tablet, etc.)

The Acoustimass module may need service.

If the steps provided do not resolve your issue, the Acoustimass module may need service. Follow the link below for more information on how to service your Acoustimass module. Depending on your product and region, you will be provided a contact number or the ability to setup service online.

Click here to start service

Your product may need service.

If the steps provided do not resolve your issue, your product may need service. Follow the link for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.

Click here to start service
Loading
    Was this article helpful?
    Submit
    Thank you for your feedback!