Enter a search term in the field above.
Nothing found. Please enter a valid search (i.e., connection help, no audio from headphones, etc.).
Back to article
Putting a system into Setup mode
Entering Setup mode lets you connect a device to the Wi-Fi network broadcast by the Bose system. This is useful for system set up and diagnostics.
Enter Setup mode.
If a Bose app or instructions ask you to put your system in Setup mode:
- Press and hold the Control button on the back of the adapter for about 10 seconds
- Wait until the Wi-Fi light on the adapter flashes once and then glows solid amber. Then, release the button
- For next steps, refer to the Bose app or instructions that asked you to enter Setup mode.
Was this article helpful?
Thank you for your feedback!