Back to article
3348
Understanding LED indicator status lights and information
Find out what the LED indicator light on your product tells you about the status of your product.
CineMate green LED indicator light status
| LED State | Status |
|---|---|
| Off | System powered off or not connected to power |
| On | System powered on |
| 1 blink every 2 seconds | System receiving a remote control commands |
| 1 blink per second, repeating | System muted |
| 1 blink | Command received from remote control |
| 2 blinks | Maximum or minumum volume reached. If the volume button is held at max. or min. volume, the double-blink repeats every few seconds |
| 4 blinks, repeating | Appears after holding the Power button for 10 seconds if the interface module does not detect audio |
| 2 blinks, repeating | Appears after holding the Power button for 10 seconds if the interface module detects audio |
| 10 blinks | Power cord was just connected and system check was successful |
Back
Loading
Was this article helpful?
Thank you for your feedback!