NOT YOUR PRODUCT?
Enter a search term in the field above.
Nothing found. Please enter a valid search (i.e., connection help, no audio from headphones, etc.).
Back to article
Note: Adapters produced after DOM 4286 have a clear plastic lens in front of the indicator allowing the light from the LED to be seen more easily. Adapters produced before this DOM may require looking directly in to the hole to to see the LED.
Understanding LED indicator status lights and information
Find out what the LED indicator light on your product tells you about the status of your product.
SoundTouch Wireless Adapter LED Status Indicator
|Off||The adapter is unpowered, connected via Ethernet or the network is disabled|
|White (blinking fast)||The adapter is attempting to connect to a Wi-Fi network|
|White (slow flash)||The adapter is downloading a firmware update|
|White||The adapter is connected to a Wi-Fi network|
|White (solid 3 sec, double-flash, repeat)||The adapter is installing a firmware update|
|Amber (blinking)||The adapter failed to connect to Wi-Fi / network error|
|Amber (blinking fast)||The adapter has a firmware error|
|Amber (solid)||The adapter is in setup mode broadcasting its "Bose SoundTouch Wi-Fi Network"|
Acoustimass Module LED Status Indicator
The status light is located on the back of the bass module. It is below the barcode and above the Console and Service labels.
|Solid Amber||Connected to the console|
(every 3 seconds)
|Acoustimass module is disconnected from the console|
|Slow Blinking Amber||Acoustimass module is available to make wireless connection to console|
|Fast Blinking Red||Bass module error|
|Solid Red||System error|
Was this article helpful?
Thank you for your feedback!