NOT YOUR PRODUCT?
Enter a search term in the field above.
Nothing found. Please enter a valid search (i.e., connection help, no audio from headphones, etc.).
Back to article
Updating the software or firmware of your product
Software and firmware updates improve product features and stability. Install any available updates to keep your product working at its best.
To update the system, connect it to the Internet.
When connected to the Internet, the system checks for updates upon each use (unless the Auto Update setting was changed to Off):
- If an update is available, the system will automatically download it. When turning off the system, an on-screen message will appear stating an update is ready to install
- If the Bose remote control is able to control your system, it will also be updated during the installation. While updating, the remote will be unusable for about one minute
- Be sure the bass module and wireless surround speaker receivers are connected wirelessly before updating. If the bass module is using a wired connection, it will not update
If the Auto Update option is turned off, select one of the methods below.
Manually initiate a software update
Update the system via the USB port
Get help if the update won't install.
If you have trouble installing the update for your product, see Software or firmware update will not install.
Check the firmware version of your product.
For instructions, see Checking the software or firmware version. To determine if it is the latest version or if a newer version is available, refer to Software and firmware versions.
Was this article helpful?
Thank you for your feedback!