FREE 2-DAY SHIPPING FOR ORDERS OF $50 OR MORE, AND FREE RETURN SHIPPING

Lifestyle® 35 DVD home entertainment system

Sold from 2001 - 2004

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (i.e., connection help, no audio from headphones, etc.).

Cannot control another device using the Bose remote

You can program your Bose universal remote to control a device from another brand connected to your system—like a TV, cable box or Blu-ray player. If you cannot find a code to control or fully control a device, try the following:

Verify your Bose system remote can control your Bose system.

If the remote does not control your system, see Remote is intermittent or does not control your Bose product.

Try the remote that came with the device you are trying to control.

Check if the original remote control for the device can control it. If it cannot, there may be an issue with the device.

Reset your media center

A reset is used to correct occasional product issues. It is not something that a product should require repeatedly. For more information, see Resetting your product.

Reset the connected audio or video device.

Electronics may need to be reset from time to time—much like rebooting a computer. Disconnect power from the device for 30 seconds, then wait for it to start up.

If you are not using a third-party remote to control your system, turn off Send IR Commands and Receive IR Commands in the system menu.

If either option is turned on, you might experience no or intermittent response when using your Bose remote. To check these settings:
  1. On your remote, press the Settings button
    Tip: If the system menu does not appear on the TV, be sure the correct TV input is selected
  2. Scroll down to select System Setup, then press the Enter button
  3. Scroll down to select Send IR Commands
  4. Scroll left or right to change the setting to Off
  5. Scroll down to select Receive IR Commands
  6. Scroll left or right to change the setting to Off.

Reprogram your remote control.

For more info, see Programming your remote.

Change the device brand to a different one, then change back to the correct one.

If the system will not allow device codes to be changed, changing the brand temporarily will often fix this and allow device codes to be changed.

Try codes under the brand labeled ???.

From the list of brands in your system menu, select ???: Miscellaneous codes are listed here. Test these codes for use with your device (Note: These codes may or may not work. There are over 1000 codes listed, so it will take some to try each.)

Connect the included IR emitter and place it on or near the device you want to control.

Since the system console—not the remote—controls your device, console placement might prevent control of your device. However, placing an IR emitter on the device ensures the remote control signal consistently reaches the device. Plug in the emitter to the IR Emitter jack on the system console. Then, place the flat side of the IR emitter on or near the remote sensor of the device(s) to be controlled. (Tip: The remote sensor on the device is often a small translucent plastic on the front of the device.)

Check that the IR emitter is correctly and securely connected to the back of the system console.

Disconnect and reconnect the IR emitter to the IR Emitter jack on the console. If you are using the additional IR emitter cable, both emitter cables plug in to one another to chain together, which leaves a single plug to connect to the console. (Tip: The additional emitter cable has a tighter fit and requires a firm push to securely connect to the console.)

Check if the device you are trying to control accepts an IR commands.

Your Bose system controls devices via IR (infrared). So, if the device cannot accept IR commands, your Bose system cannot control it. While home theater devices are commonly controlled by IR, there are a number of devices that are controlled by RF (radio frequency) or Bluetooth®. Additionally, some devices have remote control options in the device menu where you can select how you want to control the device (i.e. via IR or RF). Check if the device you want to control accepts IRs commands or has related menu settings.

Tip: Find the remote that came with the device. If there is a translucent plastic piece at the top end of the remote, it likely uses IR. However, if you cover that piece with your hand and the remote still controls the device, it might be in RF or Bluetooth mode.

Functions of some devices might only be controllable by the device remote.

Universal remotes, like your Bose remote, might control all or only certain functions of the various devices they can be programmed to control. Certain device features might only be accessible using the remote that came with the device.

Your media center may need service.

If the steps provided do not resolve your issue, your product may need service. Follow the link below for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.

Click here to start service
Loading
    Was this article helpful?
    Submit
    Thank you for your feedback!