Lifestyle 600 home entertainment system

Sold from 2016 - 2021

Help us provide the best support by confirming your product below
Select your product
Product image
Enter a search term in the field above.
Nothing found. Please enter a valid search (i.e., connection help, no audio from headphones, etc.).

Cannot control another device using the Bose remote

You can program your Bose universal remote to control a device from another brand connected to your system—like a TV, cable box or Blu-ray player. If you cannot find a code to control or fully control a device, try the following:

Verify your Bose system remote can control your Bose system.

If the remote does not control your system, see Remote is intermittent or does not control your Bose product.

Try the remote that came with the device you are trying to control.

Check if the original remote control for the device can control it. If it cannot, there may be an issue with the device.

If the device you want to control is connected with HDMI cables, here are some suggestions:

Try the following:

Make sure the system is connected to a Wi-Fi network.

To control a device using HDMI-CEC, the system must communicate to a cloud service and find a code. If the system is not connected to a Wi-Fi network, it cannot automatically receive remote code updates. To connect the system to a network, see Connecting to a Wi-Fi network.

Check for and install any available product updates.

Reset your remote control by removing the batteries for about 10 seconds.

Open the battery compartment on your remote and remove the batteries. Wait a few seconds, then re-insert the batteries and try again.

Reset your control console.

A reset is used to correct occasional product issues. It is not something that a product should require repeatedly. For more information, see Resetting your product.

Reset the connected audio or video device.

Electronics may need to be reset from time to time—much like rebooting a computer. Disconnect power from the device for 30 seconds, then wait for it to start up.

Reprogram your remote control.

For more info, see Programming your remote.

In the system menu, remove and re-add the device you cannot control.

If your system is connected to the Internet, removing and re-adding the device in the system menu prompts your system to check for and install the latest available remote code for the device. For more info, see Programming your remote.

Make sure the device is named properly

The name assigned to a device will impact which types of commands are available. For example, some cable boxes do not have specific commands associated to their remote code profile. If you need additional remote commands (to control "on-demand" content for example,) you may need to rename your device as a DVR for the commands to become available.

Check if the device you are trying to control accepts an IR commands.

Your Bose system controls devices via IR (infrared). So, if the device cannot accept IR commands, your Bose system cannot control it. While home theater devices are commonly controlled by IR, there are a number of devices that are controlled by RF (radio frequency) or Bluetooth®. Additionally, some devices have remote control options in the device menu where you can select how you want to control the device (i.e. via IR or RF). Check if the device you want to control accepts IRs commands or has related menu settings.

Tip: Find the remote that came with the device. If there is a translucent plastic piece at the top end of the remote, it likely uses IR. However, if you cover that piece with your hand and the remote still controls the device, it might be in RF or Bluetooth mode.

Connect the included IR emitter and place it on or near the device you want to control.

Since the system console—not the remote—controls your device, console placement might prevent control of your device. However, placing an IR emitter on the device ensures the remote control signal consistently reaches the device. Plug in the emitter to the IR Emitter jack on the system console. Then, place the flat side of the IR emitter on or near the remote sensor of the device(s) to be controlled. (Tip: The remote sensor on the device is often a small translucent plastic on the front of the device.)

Functions of some devices might only be controllable by the device remote.

Universal remotes, like your Bose remote, might control all or only certain functions of the various devices they can be programmed to control. Certain device features might only be accessible using the remote that came with the device.

The Control Console may need service.

If the steps provided do not resolve your issue, the Control Console may need service. Follow the link below for more information on how to service the Control Console. Depending on your product and region, you will be provided a contact number or the ability to setup service online.

Click here to start service
    Was this article helpful?
    Thank you for your feedback!