Lifestyle 600 home entertainment system

Sold from 2016 - 2021

Help us provide the best support by confirming your product below
Select your product
Product image
Enter a search term in the field above.
Nothing found. Please enter a valid search (i.e., connection help, no audio from headphones, etc.).

No picture from a connected video device

If a video device (i.e. cable box, Blu-ray player, game system, etc.) that is connected to your system does not display an image on your TV, try the following:

Confirm the TV is on and the proper input is selected.

Some TVs have a feature where input selections can be turned off or hidden from the on-screen menu. For help changing TV inputs and enabling TV inputs, refer to the TV owner's guide.

Check that that the correct audio input source is selected.

Multiple audio sources are available on your system; be sure the correct one is selected. For example, if the audio device you want to hear is connected to the auxiliary input, be sure that input selected.

Reset the connected audio or video device.

Electronics may need to be reset from time to time—much like rebooting a computer. Disconnect power from the device for 30 seconds, then wait for it to start up.

Make sure the source has been labeled correctly.

A source may have been mislabeled during setup. Verify that the source you want to view has been selected. On the remote, press Source to see the currently selected source

Reset the HDMI connection by resetting both devices and the cables connected between them.

  1. Turn off the Bose system, the source device and the TV.
  2. Unplug the Bose system, the source device and the TV.
  3. Disconnect two HDMI cables at both ends and reseat them ensuring secure connections.
  4. Reconnect the source device, the TV and the Bose system to power.
  5. Turn on the TV and the source device.
  6. Once the TV and source device have finished powering up, turn on the Bose system.
The steps can resolve issues due to a variety of causes. The TV and sources device may haves stored misinformation received through the HDMI cable. This reset procedure will clear their memory of this data.

In the menu of the connected device, try disabling HDMI-CEC.

CEC (Consumer Electronics Control) allows devices to send control information (e.g. power, input switching, remote control, etc.) back and forth over HDMI. CEC implementation and capabilities can vary among different brands, which can cause various control issues. Try disabling CEC in the menu of the connected device, then try again. Depending on the brand, CEC may be labelled differently in the device menu. For more info, see Names used by different brands for CEC.

Check the HDMI-CEC setting of your product.

CEC (Consumer Electronics Control) is a feature that allows devices connected via HDMI to communicate with each other. However, since there are a variety of brands and models of HDMI devices, sometimes devices may not communicate as expected. For issues with audio, video, or remote control operations over HDMI, try setting the HDMI-CEC option in your system menu to On or Alternative. Or to bypass HDMI-CEC, try setting the option to Off. For more info, see Turning HDMI-CEC on or off.

Which device is being used?

Cable box

Docked iPod

DVD or Blu-ray player


Game console

Satellite box

VCR or DVD recorder

Other connected video device

    Was this article helpful?
    Thank you for your feedback!