NOT YOUR PRODUCT?
Enter a search term in the field above.
Nothing found. Please enter a valid search (i.e., connection help, no audio from headphones, etc.).
Back to article
Bluetooth® disconnects from paired device
If the Bluetooth connection between your system and a connected device (i.e. laptop, smartphone, or Bose app) is intermittent or is lost unexpectedly, try the following:
Be sure your product is within 33 feet (10 meters) of the Bluetooth® device.
Bluetooth range is about 33' (10 m). This range can be reduced by obstacles (i.e. walls, doors, pockets, nearby Bluetooth devices, etc.). Try moving the device and product closer together.
Try moving the Bluetooth® device closer to your product.
Bluetooth range is about 33' (10 m); however, range can be reduced by interference, like walls, metal, doors or other Bluetooth devices in the area. Check if the issue is resolved when your Bluetooth device and product are in close proximity.
Reset your product.
Much like rebooting a smartphone, your product might need to be reset on occasion to correct minor issues. For more info, see Resetting your product.
Reboot the Bluetooth® device.
Electronics, such as cell phones, tablets or computers, might need to be reset on occasion to correct minor issues. This is typically done by shutting down the device, then powering it on again.
Clear your Bose product memory of previously-connected Bluetooth® devices.
Your Bose product remembers the last several devices it connected to so it can quickly reconnect to them. In case there is an issue with the device memory, clear it and then try to reconnect the device. For more info, see Clearing the product memory of paired Bluetooth® devices and Connecting a Bluetooth® device.
If connected to a Windows computer, check the power management setting for the Bluetooth® adapter.
- On the computer, click the Start menu and begin typing device manager
- Click Device Manager in the search results to open it
- Click the > next to Bluetooth to expand it
- Right-click your Bluetooth adapter and select Properties
- Click the Power Management tab and uncheck Allow the computer to turn off this device to save power
- Restart your computer and try again.
Check for sources of interference.
Electronics can pick up interference from other electronics connected to the same power circuit or connected within close proximity. Try disconnecting the power cord from any such nearby electronics (i.e. laptop/phone charger, TV, cable box, seasonal lights, microwave, etc.). If the issue is resolved, try connecting the device or your product to a different power circuit or farther away.
If using your product outdoors, check for differences when used indoors.
Since there are fewer boundaries and reflective surfaces outdoors, Bluetooth® signal might not reach as far. Check if the product functions better indoors to determine if the environment is the issue.
Connect a different Bluetooth® device.
Try another Bluetooth device to determine if the issue is related to the first device or its settings.
Your product may need service.
If the steps provided do not resolve your issue, your product may need service. Follow the link below for more information on how to service your product. Depending on your product and region, you will be provided a contact number or the ability to setup service online.
Click here to start service
Click here to start service
Was this article helpful?
Thank you for your feedback!