FREE 2-DAY SHIPPING FOR ORDERS OF $50 OR MORE, AND FREE RETURN SHIPPING

Wave® music system IV

Sold from 2015 - present

NOT YOUR PRODUCT?
Help us provide the best support by confirming your product below
Select your product
Product image
SUPPORT OPTIONS FOR
Loading
SEARCH
Enter a search term in the field above.
Nothing found. Please enter a valid search (i.e., connection help, no audio from headphones, etc.).

Connecting a Wave SoundLink Adapter

The Wave SoundLink adapter accessory can be connected to compatible Wave systems to offer wireless connectivity and audio playback from a computer with your Wave system.

To connect the Wave SoundLink Adapter to a Wave Music System III:

Connecting the SoundLink adapter lets you hear all sound from your computer through your Wave system
  1. Connect the cable attached to the SoundLink adapter to the Bose link jack on the back of the Wave system
    Boselink connector and adapter placement

  2. Place the adapter in a convenient location. It does not need to be within view but if it is to left of your system (as you face it), leave at least 2 in. (5 cm) between it and the system to reduce AM radio interference
  3. On the SoundLink remote, press the SoundLink/AUX button so the system display shows SOUNDLINK CONNECTING DISCOVERABLE
    Tip: If NO SIGNAL appears, see "NO SIGNAL – PRESS PLAY TO CONNECT" message displayed
  4. Lift the antenna on the SoundLink USB key to the vertical position
  5. Connect the USB key to an available USB jack on the computer: The light on the key should begin blinking

    USB key and USB input on computer
  6. Wait for the computer to detect the device and install drivers, if needed: When the light on the USB key glows solid and a tone is heard from your Wave system, it's connected.
    Tip: If the light glows solid but no sound is heard, see Selecting a sound playback device on a computer.
Loading
    Was this article helpful?
    Submit
    Thank you for your feedback!