UB-20 Series II wall/ceiling bracket

Free expedited shipping


High-quality cast zinc bracket, designed to provide unobtrusive wall mounting for Bose® cube speakers. These brackets allow both horizontal and vertical adjustment of speakers, so you can direct the sound where you like.

Compatible products

  • All Bose 2-speaker and 5-speaker home entertainment systems (excluding the Lifestyle 650 system)
Rated 5 out of 5 by from UB-20 Mounting Can these brackets be used with standard electrical junction boxes in the United States? is there a diagram of the backing plate?
Date published: 2016-03-21
Rated 5 out of 5 by from Serves it's purpose well One of these brackets was purchased to mount a center speakers above a TV. Bose included all the hardware to mount this easily adjustable bracket including plastic anchors for masonry walls, screws for wood stud mounting and "butterfly" toggle mounting on gypsum (drywall) walls when hitting the stud isn't possible. A small metal, rectangular backing plate with four mounting holes is provided to mount the small, but heavy speakers. The bracket, like Bose speakers, is high quality and includes a couple of adapter pieces to accommodate vertical or horizontal speakers. There is also provided an adapter piece that snaps onto the back of the speaker. This pieces allows you to fully mount the metal plate and set the vertical and horizontal angle of the bracket without you needing to support the weight of the speaker while tightening the single adjustment screw. Before mounting the speaker, a small decorative piece covers the backing plate. There is even thought given to routing the speaker wire through the bracket and into the speaker with small notches and a hole through which you use the Bose style speaker-wire termination plug. Picture instructions are provided for the numerous styles of vertical and horizontal Bose center, front and surround speakers speakers. Of note, the butterfly toggles provided require 1/2" holes. I would guess most home owners/DIY folks have 3/8" cordless or corded drills. This makes it necessary to carefully enlarge the holes in the gypsum just the tiniest bit to insert the toggles. However the screws provided with the toggle are long enough to adjust for 1/2" or 5/8" thick gypsum and perhaps even thicker plaster installations. Keep in mind this bracket is intended for use with Bose speakers and cannot, or at least not easily, be used with non Bose speakers. When complete, the speaker mount is professional looking, matching Bose speakers.
Date published: 2015-11-21
  • y_2017, m_6, d_16, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_ub20_acc, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_bose
  • bvseo_sdk, java_sdk, bvseo-
  • getReviews, method:CLOUD, 0ms